 |
| » |
|
|
| |
|
| » |
|
| » |
|
| » |
|
| » |
|
|
| |
|
| » |
|
| » |
|
| » |
|
|
| |
|
| » |
|
|
| |
|
| » |
|
|
| |
|
|
» |
|
| » |
|
|
| |
|
| » |
|
|
| | |
| | |
| |
|
|
|
 |
|
|
|
|
|
|
|
| |
| |
1 ProCurve Switch 8200zl Management Module (J9092A)
2 ProCurve Switch 8200zl Fabric Module (J9093A)
1 ProCurve Switch 8200zl System Support Module (J9095A)
1 ProCurve Switch 8212zl Fan Tray (J9094A)
|
|
12 open module slots
1 RJ-45 serial console port
Supports a maximum of 288 auto-sensing 10/100/1000 ports or 48 10-GbE ports or
288 mini-GBICs, or a combination |
|
|
2 x required
4 open power supply slots |
|
|
Dimensions: 18.7(d) x 17.5(w) x 15.6(h) in. (47.5 x 44.45 x 39.62 cm) (9U
height)
Weight: 50.45 lb. (22.88 kg) |
|
|
Gigabit Module: ARM9 @ 200 MHz; packet buffer size: 144 MB QDR SDRAM
10G Module: ARM9 @ 200 MHz; packet buffer size: 36 MB QDR SDRAM
Management Module: Freescale PowerPC 8540 @ 666 MHz, 4 MB flash MB, 128 MB
compact flash, 256 MB DDR SDRAM |
|
|
|
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware
included); horizontal surface mounting only. Optional 4-post cabinet rail
available. (see Switch 8212zl Ordering Guide). |
|
|
1000 Mb Latency: < 3.7 µs (FIFO 64-byte packets)
10 Gbps Latency: < 2.1 µs (FIFO 64-byte packets)
Throughput: up to 428 million pps
Routing/Switching capacity: 576 Gbps
Gbps
Switch fabric speed: 692 Gbps
Gbps
Routing table size: 10000 entries |
|
|
Operating temperature: 32ºF to 104ºF (0ºC to 40ºC)
Operating relative humidity: 15% to 95% @ 131ºF (55ºC), non-condensing
Non-operating/Storage temperature: -40ºF to 158ºF (-40ºC to 70ºC)
Non-operating/Storage relative humidity: 15% to 95% @ 149ºF (65ºC),
non-condensing
Altitude: up to 10000 ft. (3.1 km)
Acoustic: Power: 64.0 dB; ISO 7779, ISO 9296 |
|
|
|
|
|
|
Electrical characteristics
|
|
|
|
|
|
|
|
Description: Chassis ships without power supplies. Four power-supply slots
available; two different power supplies available. See power-supply products
for additional specifications.
Maximum heat dissipation: 4900 BTU/hr (5170 kJ/hr), (max non-PoE); 7400 BTU/hr
(7807 kJ/hr) (max PoE)
Voltage: 100-127 / 200-240 VAC
Frequency: 50 / 60 Hz
Notes: Power supplies must be ordered separately. Two J8712A or J8713A supplies
are required to power the J8715A base system. |
|
|
|
CSA 22.2 No. 60950; UL 60950; IEC 60950; EN 60950; IEC 60825 |
|
|
|
FCC Class A; FCC part 15 Class A; ICE-003, Canadian Radio Interface Regulation;
VCCI Class A; EN 55022/CISPR 22 Class A |
|
|
EN: EN 55024, CISPR 24
ESD: IEC 61000-4-2; 4 kV CD, 8 kV AD
Radiated: IEC 61000-4-3; 3 V/m
EFT/Burst: IEC 61000-4-4; 1.0 kV (power line), 0.5 kV (signal line)
Surge: IEC 61000-4-5; 1 kV/2 kV AC
Conducted: IEC 61000-4-6; 3 V
Power frequency magnetic field: IEC 61000-4-8; 1 A/m, 50 or 60 Hz
Voltage dips and interruptions: IEC 61000-4-11; >95% reduction, 0.5 period; 30%
reduction, 25 periods
Harmonics: EN 61000-3-2, IEC 61000-3-2
Flicker: EN 61000-3-3, IEC 61000-3-3 |
|
|
|
ProCurve Manager Plus; ProCurve Manager (included); command-line interface; Web
browser; configuration menu; out-of-band management (serial RS-232C) |
|
|
|
|
|
Device Management
|
|
RFC 1591 DNS (client) |
|
HTML and telnet management |
|
General Protocols
|
|
IEEE 802.1D MAC Bridges |
|
IEEE 802.1p Priority |
|
IEEE 802.1Q VLANs |
|
IEEE 802.1s Multiple Spanning Trees |
|
IEEE 802.1w Rapid Reconfiguration of Spanning Tree |
|
IEEE 802.3ad Link Aggregation Control Protocol (LACP) |
|
IEEE 802.3af Power over Ethernet |
|
IEEE 802.3x Flow Control |
|
RFC 768 UDP |
|
RFC 783 TFTP Protocol (revision 2) |
|
RFC 792 ICMP |
|
RFC 793 TCP |
|
RFC 826 ARP |
|
RFC 854 TELNET |
|
RFC 951 BOOTP |
|
RFC 1058 RIPv1 |
|
RFC 1519 CIDR |
|
RFC 1542 BOOTP Extensions |
|
RFC 2030 Simple Network Time Protocol (SNTP) v4 |
|
RFC 2131 DHCP |
|
RFC 2453 RIPv2 |
|
RFC 3046 DHCP Relay Agent Information Option |
|
RFC 3768 VRRP |
|
UDLD (Uni-directional Link Detection) |
|
IP Multicast
|
|
RFC 2362 PIM Sparse Mode |
|
RFC 3376 IGMPv3 (host joins only) |
|
RFC 3973 PIM Dense Mode |
|
MIBs
|
|
RFC 1213 MIB II |
|
RFC 1493 Bridge MIB |
|
|
RFC 1724 RIPv2 MIB |
|
RFC 1850 OSPFv2 MIB |
|
RFC 2021 RMONv2 MIB |
|
RFC 2096 IP Forwarding Table MIB |
|
RFC 2613 SMON MIB |
|
RFC 2618 RADIUS Client MIB |
|
RFC 2620 RADIUS Accounting MIB |
|
RFC 2665 Ethernet-Like-MIB |
|
RFC 2668 802.3 MAU MIB |
|
RFC 2674 802.1p and IEEE 802.1Q Bridge MIB |
|
RFC 2737 Entity MIB (Version 2) |
|
RFC 2787 VRRP MIB |
|
RFC 2863 The Interfaces Group MIB |
|
RFC 2925 Ping MIB |
|
Network Management
|
|
IEEE 802.1AB Link Layer Discovery Protocol (LLDP) |
|
RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9
(events) |
|
RFC 3176 sFlow |
|
ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED) |
|
SNMPv1/v2c/v3 |
|
XRMON |
|
OSPF
|
|
RFC 2328 OSPFv2 |
|
RFC 3101 OSPF NSSA |
|
QoS/Cos
|
|
RFC 2474 DiffServ Precedence, including 8 queues/port |
|
RFC 2597 DiffServ Assured Forwarding (AF) |
|
RFC 2598 DiffServ Expedited Forwarding (EF) |
|
Security
|
|
IEEE 802.1X Port Based Network Access Control |
|
RFC 1492 TACACS+ |
|
RFC 2138 RADIUS Authentication |
|
RFC 2866 RADIUS Accounting |
|
Secure Sockets Layer (SSL) |
|
SSHv2 Secure Shell |
|
|
|
|
Interface/Service modules, power supplies, and redundant management module
ordered separately
RS-232C console port via an RJ-45 connector
Power supplies must be ordered separately. Two J8712A or J8713A supplies are
required to power the J8715A base system.
When using mini-GBICs with this product, mini-GBICs with revision "B" or later
(product number ends with the letter "B" or later, e.g. J4858B, J4859C) are
required.
|
|
|
| | |
|
|
|
|
|
